Saince, Inc.

Category: Content
Type: Youtube Video

Generated 2 days ago

New videos detected

  • Void Particles

    In the latest version of FLOW-3D, the Lagrangian particle model has been completely revamped and its capabilities expanded through the addition of multiple particle classes: marker, mass, fluid, gas and void particles, each developed with specific applications in mind. When voids implode, it is not over anymore. Now voids can pass the baton to void particles. These are like small pockets of air t...

  • Mass Particles

    In the latest version of FLOW-3D, the Lagrangian particle model has been completely revamped and its capabilities expanded through the addition of multiple particle classes: marker, mass, fluid, gas and void particles, each developed with specific applications in mind. Mass particles are like solid spheres. When traveling in the fluid, these particles affect the flow profile due to their drag. E...

  • Water Resources Webinar: A comprehensive review of FLOW-3D’s modeling capabilities

    FLOW-3D offers unique free surface modeling capabilities, as well as a vast array of advanced models that are tightly coupled to free surface hydraulics to include features such as scour and sediment dynamics, particulates, air entrainment, bubble dynamics, density flows, chemistry, and many more. Following a series of webinars that have focused on various aspects of civil infrastructure and envi...

Saince, Inc.

Category: Content
Type: Youtube Video

Generated 1 week ago

New videos detected

  • Sloshing Dynamics - Visualizing Non-Inertial Reference Frame Motion

    To highlight FLOW-3D’s NIRF module capabilities, a sample simulation showing the fuel sloshing in the space shuttle is set up. The space shuttle accelerates upwards for initial 25 seconds and then de-accelerates by the same amount for the next 25 seconds. After that, using angular acceleration, the shuttle rotates by 90 degrees and then continues to accelerate linearly again. It is interesting to ...

  • Microfluidics Particle Sorting Using Hydrodynamics

    In this video of hydrodynamic microfluidic separation, we see particle sorting based on varying diameters. The technique works on the principle that a particle will follow a streamline. Particles with the smallest diameter (blue) get easily carried towards the top of the constriction and hence at the divergence follow the streamlines that diverge upwards. Particles with the largest diameter (red) ...

  • Bottle Filling Simulation - Dynamic Droplet Model

    A bottle filling example uses the dynamic droplet model for highly viscous flows. These results compare three simulations that use different values of the critical capillary number, which defines the necessary shear stress for droplet breakup. Learn more about the developments in FLOW-3D v11.2 at https://www.flow3d.com/home/products/flow-3d/flow-3d-v11-2/

Saince, Inc.

Category: Content
Type: Youtube Video

Generated 2 weeks ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 3 weeks ago

New blog articles detected

  • HHS Announces New Medicare Alternative Payment Models to Reward Better Care at Lower Cost

    Today, the Department of Health & Human Services finalized new Medicare alternative payment models that continue the Administration’s progress in reforming how the health care system pays for care. These new approaches will shift Medicare payments from rewarding quantity to rewarding quality by creating incentives for hospitals and clinicians to work together to avoid complications, avoid preventa...

  • Here are 6 points you must read before you hire your next CDI resource

    Many CDI Managers insist on having all their CDI staff onsite. Having all your staff in-house in many instances can be counter productive. Here are 6 points on why you should also consider remote CDI specialists in your staffing mix: You will have access to a much larger talent pool to hire from enabling to you hire better […]

  • Hospital outpatient departments to be impacted significantly by 2017 OPPS Final Rule from CMS

    Center for Medicare & Medicaid Services (CMS) has released its Final Rule for Hospital Outpatient Prospective Payment System  OPPS) for CY2017 with significant implications to hospital outpatient departments. Let me first give you the good news. For CY 2017, CMS is updating OPPS rates by 1.65 percent. The change is based on the projected hospital market basket […]

Saince, Inc.

Category: Content
Type: Youtube Video

Generated 3 weeks ago

New videos detected

  • Combined Sewer Overflow Simulation

    Combined Sewer Overflow hydraulic structures come in all sorts of design flavors. FLOW-3D allows for detailed analyses of the hydraulics in dry and wet tunnel conditions. To learn more about simulations like these, register for our upcoming webinar: Water Resources: a comprehensive review of FLOW-3D’s modeling capabilities at https://attendee.gotowebinar.com/register/7378345725325549057

  • Thermocapillary actuation with 4 heaters

    Thermocapillary actuation on an array of 4 heaters activated in a sequential order. Read more about this case study on our blog at https://www.flow3d.com/droplet-routing-patterned-surface/

  • Gas Particles and Microbubble Mixing

    This animation using the newly-redesigned particle model in FLOW-3D v11.2 shows the mixing progress in both time and space. Initially, the fluid is unmixed throughout the domain. At the onset of microbubble injection, a rotational flow is being generated. As shown in the 3 inset plots, mixing quality improves along the length of the device. Read the full blog post at https://www.flow3d.com/gas-par...

  • Mooring Line Model - Breaking Mooring Lines

    In FLOW-3D v11.2, the mooring line model has been extended to include the breaking of mooring lines. This simulation shows a failure of a single point mooring (SPM) buoy system under a severe wave condition. A cargo ship is moored to the SPM buoy that is anchored to the seabed by three mooring lines. A periodic wave, 10 m in height and 100 m in length, pushes the ship downstream causing the moorin...

  • Point Absorber Device Simulation

    This simulation shows a point absorber device with a buoyant spherical structure on top, moving up and down with the crests and troughs of the incoming waves. FLOW-3D’s moving objects model is used to allow coupled motion in the z-direction while restricting movement in the x or y directions. Stokes type waves were used with an amplitude of 5 m and wavelength of 100 m. The RNG model was used to ca...

  • Semi-Continuous Casting of a 600 mm Slab with Stress Calculation

    A startup process of a semi-continuous casting of a 600 mm diameter slab is modeled in this simulation. Liquid metal, A7050 alloy, enters from the top through a ceramic nozzle, passes through a graphite mold and emerges into the air where it is cooled by water spray which is modeled by a prescribed temperature and a heat transfer coefficient. A steel cap at the bottom initiates the movement of the...

  • Selective Laser Melting

    This FLOW-3D simulation shows an Selective Laser Melting (SLM) process with multiple layer deposition. Notice the momentary pause of the particle beam motion every time the substrate changes its direction. Also, as layers are deposited, the shape of new layers changes due to the unequal addition of heat to each layer from the porous heat source. Read the full blog post at https://www.flow3d.com/se...

  • HPDC Webinar Series: Part 1 – Thermal Die Cycling

    High pressure die casting (HPDC) simulations are typically quite complex. To accurately model the entire physical process one needs to account for heat transfer, melting and solidification, air entrainment, surface defect tracking and cavitation. In this three-part webinar series, we will simulate the entire HPDC process in FLOW-3D Cast. We will also demonstrate the power of the new process-orient...

  • Mass Particles and Acoustophoretics

    FLOW-3D simulation of the microchannel motion at different levels of amplitude illustrating the evolution of particle sorting. The inset graph shows the channel velocity. Read more about this case study on our blog at https://www.flow3d.com/mass-particles-and-acoustophoretics/

  • Thermocapillary actuation using microheater arrays

    This FLOW-3D simulation shows a comparison between a fully-wetted and a partially-wetted surface. As expected, the fully-wetted surface makes the droplet flatter (and more spread out) than in the partially-wetted surface. As the heaters are activated one at a time, the droplet is propelled towards a colder area. It can be seen that the fully-wetting surface loses more fluid volume by the end of th...

  • Automated geometry optimization using FLOW-3D Cast and CAESES

    This webinar demonstrates how you can bring your simulation-driven design to the next level using the automated optimization software CAESES and FLOW-3D Cast. Looking at a gravity casting process, we will illustrate optimization techniques, including geometrical changes, in order to find the ideal configuration for the runner system that satisfies objectives like minimizing defects in the final pa...

  • Nucleation Case Study

    FLOW-3D animation showing the temperature of the heated plate along with the creation, evolution and subsequent collapse of the bubble from multiple angles. For the full case study, go to our blog at https://www.flow3d.com/nucleation/

  • What's New in FLOW-3D v11.2

    FLOW-3D v11.2 includes major new features, significant advances in solver performance as well as performance improvements in user interface graphics in areas like transparency and large raster data sets. Featured developments include the expanded Particle Model, the new Dynamic Droplet Model and Interactive Geometry Creation. The performance of the FSI/TSE model has been greatly improved, and the ...

Saince, Inc.

Category: Content
Type: Blog Article

Generated 5 months ago

New blog articles detected

  • Front End Speech Recognition: A case of dime wise and dollar foolish?

    A new study sponsored by Agency for Healthcare Research and Quality (AHRQ) identified the frequency with which errors occur when physicians use front end speech recognition. ” Critical errors were found in 15 percent of data entered into patients’ electronic health records by physicians using computerized speech recognition technology, according to a pilot study funded […]

Saince, Inc.

Category: Content
Type: Blog Article

Generated 5 months ago

New blog articles detected

  • Hospital readmission rates are falling across the country

    Potentially avoidable hospital readmissions that occur within 30 days of a patient’s initial discharge are estimated to account for more than $17 billion in Medicare expenditures annually. Not only are readmissions costly, but they are often a sign of poor quality care. To address the problem of avoidable readmissions, the Affordable Care Act created the Hospital […]

  • CMS launches ‘Pick Your Pace’ options for physicians as part of Quality Payment Program

    As part of CMS’ move to link physician payments to patient outcomes, the Quality Payment Program put in place by CMS is set to begin on January 1, 2017. CMS has shared plans for the timing of reporting for the first year of the program. It allows Quality Payment Program to allow physicians to pick their […]

Saince, Inc.

Category: Content
Type: Youtube Video

Generated 5 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 6 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 6 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 6 months ago

Saince, Inc.

Category: Content
Type: Youtube Video

Generated 6 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 7 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 7 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 7 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 7 months ago

Saince, Inc.

Category: Content
Type: Blog Article

Generated 7 months ago

Out-Market Your Competitors?

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account Log in

Out-Market Your Competitors

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account

Already a user?  Log in