Hy-Pro Filtration

Hy-Pro Filtration

Category: Content
Type: Blog Article

Generated 1 month ago

New blog articles detected

  • Hydraulic Pump Reliability

    The Problem Pumps are the heart of hydraulic systems. When the pump fails, the entire system is down until the pump is operational again. This poses a serious threat to any operation relying on hydraulic systems for productivity. Recently, a hydraulic valve manufacturer was losing 25 pumps a year on their centralized hydraulic system at a cost of $2,440 each. That’s only the pump cost...

Hy-Pro Filtration

Category: Content
Type: Blog Article

Generated 1 month ago

New blog articles detected

  • Cleanliness Requirements for Fluid Transfer

    The Problem Today’s oil suppliers are often required to provide fluid at or below a specified ISO Cleanliness Code. One such supplier was experiencing short filter element life (15 days) on the system (7 element multi-round housing) used to achieve the required ISO Cleanliness Code of 18/16/13 in a single pass as 15W-40 oil is transferred from their bulk storage tanks to tanker trucks...

Hy-Pro Filtration

Category: Content
Type: Blog Article

Generated 1 month ago

New blog articles detected

  • Sheet Metal Stamping | Automotive Manufacturing

    The Application An automotive stamping plant operating large presses to produce body panels was experiencing high surface finish defect scrap. Lubricating oil contamination was causing surface imperfections that would be visible after painting. The Problem The uncoiler / washer lube oil system was protected by an off-line filtration system fitted with CJC stacked disc cellulose medi...

  • Gearbox Lube Oil - Aluminum Refinery

    The Application An Australian aluminum refinery was consistently performing premature gearbox lube oil changes on 7 base drive units due to oil and particulate contamination. With an average operating ISO code of 20/18/16 and average water levels of 4742ppm, the 360 liters / 90 gallons of ISO VG320 gear oil was being changed far too often. Cost per gearbox oil change (excluding crane, ...

  • Hydraulic Valve Performance Test Stands & Clean Oil

    The Application A hydraulic valve manufacturer required pristine fluid (< 14/12/9) to test flow across an 80 micron orifice on their test stand. Gross amounts of contamination in the fluid would skew the test results, invalidating any data collected. The system held 100 l (26.4 gal) of ISO VG 32 fluid with a flow rate of 25 lpm (6.6 gpm). Through observing the manufacturer’s sampling...

Hy-Pro Filtration

Category: Content
Type: Blog Article

Generated 7 months ago

Out-Market Your Competitors?

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account Log in

Out-Market Your Competitors

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account

Already a user?  Log in