Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 1 week ago

New videos detected

  • Used- Flexicon Screw Conveyor, Stainless Steel - stock # 47729019

    http://www.aaronequipment.com/usedequipment/conveyors/screw-conveyors/flexicon-47729019 Used- Flexicon Screw Conveyor, Stainless Steel. Maximum capacity approximate 300 cubic feet per hour. Approximate 4" diameter x 108" long screw. Driven by a 5hp, 3/60/208-230/460 volt, 1725 rpm motor. 4" Inlet, 6" outlet. Tube OD approximate 4-1/2".

  • Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer - stock # 48336001

    http://www.aaronequipment.com/usedequipment/mixers/homogenizer-mixers/quadro-z3-48336001 Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer, Model Z3, 316 Stainless Steel. Approximate capacity 100 Gallons per minute. Approximate 6-1/2" diameter x 6" deep chamber, 2" tri-clamp inlet/outlet. Requires rotor and stator assembly (NOT INCLUDED). Driven by a 20hp, 3/60/208-230/460 volt, 3520 rpm ...

  • Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer - stock # 48336003

    http://www.aaronequipment.com/usedequipment/mixers/homogenizer-mixers/quadro-z3-48336003 Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer, Model Z3, 316 Stainless Steel. Approximate capacity 100 Gallons per minute, 120 psi. Approximate 6-1/2" diameter x 6" deep chamber, 2" tri-clamp inlet/outlet. Includes rotor and stator assembly. Driven by a 20hp, 3/60/208-230/460 volt, 3520 rpm motor....

  • Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer - stock # 48336002

    http://www.aaronequipment.com/usedequipment/mixers/homogenizer-mixers/quadro-z3-48336002 Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer, Model Z3, 316 Stainless Steel. Approximate capacity 100 Gallons per minute, 120 psi. Approximate 6-1/2" diameter x 6" deep chamber, 2" tri-clamp inlet/outlet. Includes rotor and stator assembly. Driven by a 20hp, 3/60/208-230/460 volt, 3520 rpm motor....

  • Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer - stock # 48336004

    http://www.aaronequipment.com/usedequipment/mixers/homogenizer-mixers/quadro-z3-48336004 Used- Quadro Ytron Z Single-Pass Emulsifier / Homogenizer, Model Z3, 316 Stainless Steel. Approximate capacity 100 Gallons per minute, 120 psi. Approximate 6-1/2" diameter x 6" deep chamber, 2" tri-clamp inlet/outlet. Includes rotor and stator assembly. Driven by a 20hp, 3/60/208-230/460 volt, 3520 rpm motor....

  • Used- Durco Centrifugal Pump, Size 3X2-13/130 - stock # 86051

    http://www.aaronequipment.com/usedequipment/pumps/alloy-centrifugal/durco-3x2-13-130-86051 Used- Durco Centrifugal Pump, Size 3X2-13/130. Ferralium 225. 3" inlet x 2" outlet. Approximately 90 gallons per minute at 40' head at 1750 RPM. Driven by a 25 HP, 3/60/230/460 Volt, 1780 RPM motor. Mounted on a carbon steel base.

  • Used- Carter Day Spin-Away Spin Dryer, Model DBA2 - stock # 44081010

    http://www.aaronequipment.com/usedequipment/plastics-equipment/dryers-spin/carter-day-dba2-44081010 Used- Carter Day Spin-Away Spin Dryer, Model DBA2, 304 Stainless Steel. Driven by a 5hp, 3/60/230/460 volt, 1730 rpm motor. Includes an Agglomerate unit, model AU200, and a carbon steel stand.

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384094

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384094 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Requires 60hp motor. Mounted on a base. Serial# 207032-97.

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384095

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384095 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384098

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384098 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384100

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384100 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384101

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384101 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384102

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384102 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384104

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384104 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

  • Used- Waukesha Rotary Positive Displacement Pump, Model 320 - stock # 47384105

    http://www.aaronequipment.com/usedequipment/pumps/positive-displacement/waukesha-320-47384105 Used- Waukesha Rotary Positive Displacement Pump, Model 320, 316 Stainless Steel. Approximately 450 gallons per minute at 200 psi at 600 rpm capacity, (0.754) gallon displacement per revolution. 6" Inlet & outlet. Driven by a 60hp, 3/60/460 volt, 1775 rpm motor thru a reducer, ratio 4.93 to 1. Mounted on...

Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 2 weeks ago

New videos detected

  • Used- Jacmor Engineering Double Spiral Ribbon Batch Mixer - stock # 46084001

    http://www.aaronequipment.com/usedequipment/mixers/ribbon-blenders/46084001 Used- Jacmor Engineering Double Spiral Ribbon Batch Mixer, Model BLN 8A, Approximate Capacity 7 Cubic Feet, Stainless Steel. S.W.L. 100Kg. Non-jacketed trough approximately 39-1/2" long x 18" wide x 24" deep. Approximate 2-1/4" diameter shaft, inner ribbon 1-3/4" wide x 1/4" thick, outer ribbon 1-1/8" wide x 5/16" thick w...

  • Used- APV Gaulin GMBH Homoginizer - stock # 48130001

    http://www.aaronequipment.com/usedequipment/homogenizers/homogenizers/apv-lab60-125-6tbs-48130001 Used- APV Gaulin GMBH Homoginizer, Type LAB60/125-6TBS, 316 Stainless Steel. Capacity 125 liters (33 gallons) per hour, 400 bar (5800 psi) maximum pressure. Two stage homogenizing valve. 1-1/2" Tri-clamp inlet & outlet. Driven by a 2.2kW (3hp) 3/50/60/725/870 rpm motor. Mounted on stainless steel fra...

  • Used- Dynamic Air Forberg Twin Shaft Fluidizer - stock # 46441002

    http://www.aaronequipment.com/usedequipment/mixers/paddle-mixer/dynamic-air-b-350xe-46441002 Used- Dynamic Air Forberg Twin Shaft Fluidizer, 12.36 Cubic Feet, Model B-350XE, 304 Stainless Steel. Non-jacketed chamber 40" wide x 50" long x approximate 33" deep. (2) 3" Diameter shafts with 28 paddles approximate 7-1/2" wide x 3/16" thick, welded to 1-1/4" diameter posts. Driven by approximate 7.5 hp...

  • Used- Alfa-Laval VS 160 G-K Pusher Centrifuge - stock # 46226001

    http://www.aaronequipment.com/usedequipment/centrifuges/basket-pusher/alfa-laval-vs-160-g-k-46226001 Used- Alfa-Laval VS 160 G-K Pusher Centrifuge, 316 Stainless Steel. Maximum bowl speed 5900 rpm. 3.67"/7.02" (94mm/180mm) Screen bowl. Complete with 5.5kW (7.5hp), 3/50/380 volt, 2880 rpm motor. Included on/off control panel. Frame mounted on wheels.

  • Used- Forberg Style Twin Shaft Paddle Mixer - stock # 45532001

    http://www.aaronequipment.com/usedequipment/mixers/paddle-mixer/forberg-kreyenburg-45532001 Used- Forberg Style Twin Shaft Paddle Mixer. Approximate 15.9 Cubic Feet Capacity, 304 Stainless Steel. Non Jacketed trough 43" x 40" x 24" deep. (2) 2.5" Diameter shafts with (22) paddles 5-1/4" wide x 3/16" thick, welded to 1" diameter posts. Driven by a 5.5HP (4kW), 3/60/230-460/1755 rpm, 4 HP(3KW)3/50/...

  • Used- Patterson Kelley Twin Shell Solids Processor - stock # 44099089

    http://www.aaronequipment.com/usedequipment/dryers-drying-equipment/double-cone-v-rotary-vacuum/patterson-kelley-10-44099089 Used- Patterson Kelley Twin Shell Solids Processor, 20 Cubic Feet. 316 Stainless steel construction product contact areas. Maximum material density 65 pounds a cubic foot. Internal rated full vacuum at 250 degrees F. 304 Stainless steel jacket rated 30 psi at 250 degrees F....

Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 3 weeks ago

New videos detected

  • Used- Prater Industries Rota-Sieve Centrifugal Sifter - stock # 43015004

    http://www.aaronequipment.com/usedequipment/screeners-sifters/rotary-screeners/prater-91-43015004 Used- Prater Industries Rota-Sieve Centrifugal Sifter, 304 Stainless Steel. Approximate 7" diameter x 23" 3 blade rotor, no screen section. Approximate 3" diameter feed screw. Side access door, 6" top feed, end overs outlet with chute, 6 fines outlet with chute. Driven by a 3 hp, 3/60/208-230/460 vol...

  • Used- Macon Screener, 316 Stainless Steel - stock # 48604003

    http://www.aaronequipment.com/usedequipment/screeners-sifters/circular-screeners/macon-48604003 Used- Macon Screener, 316 Stainless Steel. 48" Diameter, single deck, 2 separations, with top cover. Openings top: (1) 6", (1) 8", Outlets: approximately (2) 8". Driven by a 2-1/2 hp, 3/60/208-230/460 volt, 1160 rpm motor. Mounted on a painted carbon steel base with frame. Serial# 4888889.

  • Used- Fitzpatrick Fitzmill, Model DASO6 - stock # 48447002

    Used- Fitzpatrick Fitzmill, Model DASO6, 314/316 Stainless Steel. (16) Impact fixed 410/16/20 stainless steel blades. 6" x 11" Cutting chamber. Approximate 2" diameter screw feed with hopper, driven by a 1/3 hp 3/60/208-230/460 volt, 1725 rpm motor with 40:1 gearbox ratio. Mill driven by a 10 hp, 3/60/230/460 volt, 1740 rpm motor. Mounted on a stainless steel frame with carbon steel legs. No botto...

  • Used- Aaron Process Company Inc Double Arm Lab Mixer - stock # 48156007

    Used- Aaron Process Double Arm Lab Mixer, 1 Gallon Working Capacity, 2.3 Gallon Total Capacity, 304 Stainless Steel. Jacketed bowl 9-1/2" front to back x 7" left to right x 8-3/4" deep rated for 150 psi. Sigma blades driven by a 2 hp, 3/60/230/460 volt, 1715 rpm gear motor with 30:1 ratio. Top hinged cover, manual tilt bowl. Mounted on a carbon steel cart. Serial# 94001002478A103.

  • Used- Tank, Approximately 1500 gallon - stock # 48515001

    http://www.aaronequipment.com/usedequipment/tanks/stainless-1000-4999-gal/48515001 Used- Tank, Approximately 1500 gallon, 304 Stainless Steel, Vertical. Approximate 80" Diameter x 73" straight side, slight conical top and bottom. Openings top: 18" manway w/cover, side: 2-1/2". 2-1/2" Center bottom outlet. Mounted on (4) carbon steel legs. No manufactures tag.

  • Used- Sturtevant Roll Crusher, Model 8 X 5 stock # 48417004

    http://www.aaronequipment.com/usedequipment/crushers/roll-crushers/sturtevant-8-x-5-48417004 Used- Sturtevant Roll Crusher, Model 8 X 5, Carbon Steel. Approximate capacity 1/4 to 2 tons per hour, product size 1/2" to 20 mesh. (2) 5" wide x 8" diameter rolls. Driven by a 2 hp, 3/60/208-230/460 volt, 1725 rpm motor. Mounted on carbon steel frame. Serial #5054. Built 2000.

  • Used- Sturtevant Sample Grinder, Model 2-10 - stock # 48417002

    http://www.aaronequipment.com/usedequipment/mills/mills-others/sturtevant-2-10-48417002 Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1...

  • Used- Winbco Tank Company Double Spiral Ribbon Blender - stock # 48404004

    http://www.aaronequipment.com/usedequipment/mixers/ribbon-blenders/winbco-tank-company-48404004 Used- Winbco Tank Company Double Spiral Ribbon Blender, Approximate 320 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximately 120" long x 72" wide x 78" deep. Approximate 10" diameter shaft, inner ribbon 2-1/2" wide x 5/8" thick, outer ribbon 2-1/2" wide x 5/8" thick, welded to 3-1/2" diam...

  • Used- Winbco Tank Company Double Spiral Ribbon Blender, - stock # 48404002

    http://www.aaronequipment.com/usedequipment/mixers/ribbon-blenders/winbco-tank-company-48404002 Used- Winbco Tank Company Double Spiral Ribbon Blender, Approximate 320 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximately 120" long x 72" wide x 78" deep. Approximate 10" diameter shaft, inner ribbon 2-1/2" wide x 5/8" thick, outer ribbon 2-1/2" wide x 5/8" thick, welded to 3-1/2" diam...

  • Used- Sharples DS-406 Super-D-Canter Centrifuge - stock # 48387001

    http://www.aaronequipment.com/usedequipment/centrifuges/decanter/sharples-ds-406-48387001 Used- Sharples DS-406 Super-D-Canter Centrifuge. 317 Stainless steel construction, maximum bowl 3650 speed, 8" single lead conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with carbide wear inserts, ring palte dam, silicone rings, base, casing, standard feed pi...

  • Used- Pfaudler Glass Lined Tank, 1000 Gallon - stock # 48199015

    http://www.aaronequipment.com/usedequipment/tanks/glass-lined/48199015 Used- Pfaudler Glass Lined Tank, 1000 Gallon, 9119 Blue Glass, Vertical. Approximate 60" diameter x 60" straight side, 2:1 elliptical top and bottom. Internal rated 100/Full Vacuum at -20 to 450 degrees F. Openings top 24" man way with cover, (3) 4", 6". 4" Bottom outlet. Mounted on (4) legs. National Board# 50745, serial# J04...

  • Used- Bonnot Chopper/Extruder, 316/304 Stainless Steel - stock # 47729018

    http://www.aaronequipment.com/usedequipment/extruders-non-plastic/extruders-non-plastic/bonnett-47729018 Used- Bonnot Chopper/Extruder, 316/304 Stainless Steel. Non-jacketed trough 30" long x 20-1/2" wide x 25-1/2" deep. 6" diameter shaft, approximate 20" diameter x 50" long x 6-3/4" pitch screw. Driven by a 60 HP, 3/60/230/460 Volt, 1775 RPM motor thru a Dodge torque arm, model TDT10. 12" Diamet...

  • Used- P. Prat S.A. Lab Style Sigma Mixer, Model OXA-S - stock # 47729008

    http://www.aaronequipment.com/usedequipment/lab-equipment/lab-equipment/oxa-s-47729008 Used- P. Prat S.A. Lab Style Sigma Mixer, Model OXA-S, Stainless Steel. Approximate 1 gallon capacity. Jacket bowl approximately 8-1/2" front to back x 6-1/4" left to right x 6-15/16" deep, no rating. Driven by a 1.5kW, 3/60/220/380 volt, 1400 rpm gear motor, ratio 48 to 1. Has top hinged cover with hinged grat...

  • Used- K-Tron Loss-in-Weight Feeder, Model K2LT20 - stock # 47729003

    http://www.aaronequipment.com/usedequipment/feeders/volumetric/brabender-47729003 Used- K-Tron Loss-in-Weight Feeder, Model K2LT20, 316 Stainless Steel. Approximately 10 pounds per hour capacity. (2) 1/2" diameter x 15" long 316 stainless steel concave style screws, approximate 8" diameter x 6" deep clamp on trough. Driven by a .45 KW (.50hp), 100 volt, 2000 rpm motor. Includes top feed hopper. Mo...

  • Used- Day Spin Dryer, Model DBL2 - stock # 46651007

    http://www.aaronequipment.com/usedequipment/plastics-equipment/dryers-spin/dbl2-46651007 Used- Day Spin Dryer, Model DBL2. Approximate 11" diameter x 41" long chamber, driven by a 2 hp, 208-230-460 volt/1725 rpm motor, with water tank. Serial# 127-94.

Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 1 month ago

New videos detected

  • Used- Ver-Tech, Inc. Vertical Mini Baler, Model M-30 - stock # 48638004

    http://www.aaronequipment.com/usedequipment/balers/balers/m-30-48638004 Used- Ver-Tech, Inc. Vertical Mini Baler, Model M-30, Carbon Steel. Approximate bale size 30" wide x 24" deep x 30" tall. Driven by a 1-1/2 hp, 1/60/115 volt, 3450 rpm power pack..

  • Used- Marathon Vertical Baler, Model V-6030, Carbon Steel - stock # 48638003

    http://www.aaronequipment.com/usedequipment/balers/balers/marathon-equipment-6030-48638003 Used- Marathon Vertical Baler, Model V-6030, Carbon Steel. Approximate bale size 60" wide x 30" deep x 42" tall. Driven by a 10 hp, 3/60/208-230/460 volt, 1760 rpm motor power pack. Serial# 162867..

  • Used- Marathon Vertical Baler, Model V-6042 - stock # 48638002

    http://www.aaronequipment.com/usedequipment/balers/balers/marathon-equipment-v-6042-48638002 Used- Marathon Vertical Baler, Model V-6042, Carbon Steel. Approximate bale size 60" wide x 42" deep x 30" tall. Bale weight approximate 800 pounds. Driven by a 10 hp, 3/60/208-230/460 volt, 1725 rpm motor power pack. Serial# 83593..

  • Used- Load King Vertical Baler, Model VB-6036-WL, - stock # 48638001

    http://www.aaronequipment.com/usedequipment/balers/balers/vb-6036-wl-48638001 Used- Load King Vertical Baler, Model VB-6036-WL, Carbon Steel. Approximate bale size 60" x 36". Driven by a 10 hp, 3/60/230/460 volt, 1735 rpm hydraulic power pack. Serial# 9126..

  • Used- Curtis Kelly Metal Fab. Tank, Approximate 5,500 Gallon - stock # 48608002

    http://www.aaronequipment.com/usedequipment/tanks/stainless-5000-gal-and-up/mueller-corp-48608002 Used- Curtis Kelly Metal Fab. Tank, Approximate 5,500 Gallon, 316 Stainless Steel, Horizontal. Approximately 92" diameter x 188" straight side, dished heads. Internal rated 58 psi at -20 to 200 degrees F. Dimple jacket on bottom of tank approximate 48" wide x 80" long (no rating). Openings top: 18" m...

  • Used- Siemens J-Press Filter Press, 800G32-32-16DYLS - stock # 48606004

    http://www.aaronequipment.com/usedequipment/filters/filter-press/us-filter-800g32-32-16dyls-48606004 Used- Siemens J-Press Filter Press, 800G32-32-16DYLS. (31) 31-1/2" x 31-1/2" (800mm x 800mm) polypropylene plates, approximate 3/4" recess, (1) head, (1) tail plate. Approximate 220 square feet filter area, 18.375 cubic feet cake capacity. 100 psi maximum feed pressure, 120 psi air supply pressure...

  • Used- Sweco Screener, 60" Diameter, Triple Deck, 4 Separation - stock # 48604002 RS Running

    Used- Sweco Screener, 60" Diameter, Triple Deck, 4 Separation. Driven by a 2-1/2 hp, 3/60/230-460 volt, 1160 rpm motor. Mounted on a carbon steel base.

  • Used- McQuay Air Conditioner, Model RCS20F240D - stock# 48339044

    http://www.aaronequipment.com/usedequipment/air-conditioners/air-conditioners/mcquay-snyder-rcs20f240d-48339044 Used- McQuay Air Conditioner, Model RCS20F240D. Driven by 1/3hp 3/60/460 volts motor. Contains R-410A Refrigerant and POE oil. Built 2012. Serial #7932F121204679.

  • Used- McQuay Air Conditioner, Model RCS20F240D - stock # 48339045

    http://www.aaronequipment.com/usedequipment/air-conditioners/air-conditioners/mcquay-snyder-rcs20f240d-48339045 Used- McQuay Air Conditioner, Model RCS20F240D. Driven by 1/3hp 3/60/460 volts motor. Contains R-410A Refrigerant and POE oil. Built 2012. Serial #7932F121204680.

  • Used- Carrier Air Cooled Condensing Unit, 39.8 Tons - stock # 48339042

    http://www.aaronequipment.com/usedequipment/air-conditioners/air-conditioners/carrier-38aps04065-48339042 Used- Carrier Air Cooled Condensing Unit, 39.8 Tons, Model 38APS04065A26130. 460/60/3. R-410A Refrigerant. Serial# 5012Q46756.

  • Used- Aqua Munchy Recycling Line - stock # 48442002

    http://www.aaronequipment.com/usedequipment/plastics-equipment/pelletizing-line-single-screw/munchy-p130-48442002 Used- Aqua Munchy Recycling Line consisting of: Munchy single screw extruder, Model P130, 130mm (5.12") diameter screw, approximate 24 L/D ratio. 9 Zone, electrically heated, air cooled, 120" long barrell. Nip roll feed driven by a 2hp motor. Extruder driven by a 140 kW, 3/60/460 volt...

  • Used- Aqua Munchy Recycling Line - stock # 48442001

    http://www.aaronequipment.com/usedequipment/plastics-equipment/pelletizing-line-single-screw/munchy-p130-48442001 Used- Aqua Munchy Recycling Line consisting of: Munchy single screw extruder, Model P130, 130mm (5.12") diameter screw, approximate 24 L/D ratio. 9 Zone, electrically heated, air cooled, 120" long barrell. Nip roll feed driven by a 2hp motor. Extruder driven by a 169 kW, 3/60/460 volt...

  • Used-Berstoff 25mm Twin Screw Extruder, type ZE25-40D - stock # 48187001

    http://www.aaronequipment.com/usedequipment/plastics-equipment/pelletizing-line-twin-screw/berstorff-ze25-40d-48187001 Used-Berstoff 25mm Twin Screw Extruder, type ZE25-40D. Co-rotating side by side screw design. 40:1 L/D ratio. Electrically heated, air cooled, 1 feed section. 3 degassing sections (1 active/2 blocked). Max screw speed 564 RPM via a 15.75 hp (10.5 kW) Flender gearbox, type 193-804...

  • Used- Tuthill PD Series Rotary Positive Displacement Blower - stock # 48643003

    http://www.aaronequipment.com/usedequipment/blowers/blowers/tuthill-70264gl2-48643003 Used- Tuthill PD Series Rotary Positive Displacement Blower, Model 7026-46L2, Carbon Steel. Approximately rated 2000-2500 CFM. Inlet and outlet approximately 11". Driven by 125 hp, 3/60/460, 1785 rpm motor. Includes Universal silencer, model RDY-10. Mounted on a carbon steel. Serial# 1291470611.

Aaron Equipment Company

Category: Content
Type: Blog Article

Generated 1 month ago

New blog articles detected

  • Aaron Equipment and AEK Set the Standard at PACK EXPO International

    Aaron Equipment Company and Aaron Kendell Packaging Equipment (AEK) recently exhibited at PACK EXPO International on November 6-9, 2016 at McCormick Place in Chicago, IL. The show was sold out with more than 2,000 exhibitors and 55,000 attendees who had the opportunity to check out new and innovative packaging solutions from a wide variety of industries.   “The atmosphere was absolutely electric...

  • Big Growth Year for AEK Leads to Relocation to Accommodate Larger Used Packaging Inventory and Showroom

    It’s an exciting time at packaging industry leader Aaron Kendell Packaging Equipment. After a banner year of growth in 2016, AEK is relocating from Bensenville, Illinois to a standalone, state-of-the-art facility in Belvidere, Illinois, just west of Chicago, by January 1, 2017. The reasoning is simple: In two years, our footprint has tripled, and the value of our inventory jumped 25 percent from 2...

  • Aaron Equipment Company Exhibited at the Supply Side West 2016 Tradeshow at the Mandalay Bay Convention Center

    Aaron Equipment Company and AEK Packaging Equipment exhibited at the 2016 Supply Side West Show on October 6-7th in Las Vegas, Nevada. The show focused on a number of markets including: Dietary Supplements, Food and Beverage, Personal Care, Sports Nutrition, Animal Nutrition, and Pharmaceutical. The 2016 expo floor was the largest yet, featuring more than 1,200 exhibitors and 14,000 attendees netw...

  • Aaron Equipment Company Poised to Meet Demand of Expanding Heat Exchanger Market

    According to market research firm Markets and Markets, the heat exchangers market is anticipated to be worth 19.14 billion U.S. dollars by 2021. That figure represents a cost-adjusted growth rate of 8.2% over 2016’s $12.94 billion valuation. In the interim, Global Industry Analysts expect the heat exchanger market to jump to $13.5 billion by the year 2017. What is fueling all this growth? He...

  • Aaron Equipment Company Exhibited at Power-Gen International with Great Success

    Aaron Equipment Company recently exhibited at the 2016 Power-Gen International tradeshow on December 13-15, 2016 at the Orange County Convention Center in Orlando, Florida. The show had 1,400 exhibitors, 70+ Conferences and was attended by nearly 20,000 people from 105 countries. Attendees were able to discover a wide variety of products and services that represented the generation sector with emp...

Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 1 month ago

New videos detected

  • Used- Carruthers Auto Slicer/Dicer with Drop Chute - stock # 48428002

    http://www.aaronequipment.com/usedequipment/dicers-slicers/dicers-slicers-cutters/carruthers-5100-48428002 Used- Carruthers Auto Slicer/Dicer with Drop Chute, Model 5100 1D, 304 Stainless Steel. Approximately 450 slices per minute with (3) blade knife. Requires knife. Rubber Top Belt 25" long x 11" wide, Rubber Bottom Belt 67" long x 12.5" wide. Driven by .25 hp, 3/60/230/460 volt, 1730 rpm motor...

  • Used- Portable Tank System - stock # 48548002

    Used- Portable Tank System. Consisting of approximately 150 gallon tank, 316 Stainless Steel, Vertical. Approximately 32" Diameter x 40" straight side, dished top and bottom. Openings: top 5-1/2", 1", 2". Side: (2) 2", 8". 3" center bottom outlet. Includes Waukesha pump. Skid Mounted, portable with 4 wheels.

  • Used- Letsch/Precision Stainless Inc Tank - stock # 48548001

    Used- Letsch/Precision Stainless Inc Tank, Approximate 400 Gallon, 316L Stainless Steel, Vertical. Approximate 48" diameter x 46" straight side, dished top and bottom. Internal rated 14.7 psi (Atmos.) at 350 degrees F. Openings top: (4) 2", 6", 4", 3", 18" man way with cover, Side: 3". 2" Center bottom outlet. Side lug mounted. Serial# 6133-6, No National Board#, built 1985.

  • Used- Sumitomo Horizontal Injection Mold Machine, Model SE180D - stock # 48525002

    http://www.aaronequipment.com/usedequipment/plastics-equipment/injection-molders-horizontal/48525002 Used- Sumitomo Horizontal Injection Mold Machine, Model SE180D. Screw diameter: 50 mm, Injection capacity: 10.7 ounce, Clamping force: 180-Ton, Distance between tie bars: 22" (560mm) x 20" (510mm), Mold thickness: 7.875" (200mm) - 19.685" (500 mm). Serial# MOKT5003, built 2002.

  • Used- Littleford Plow Mixer, 304 Stainless Steel. - stock # 48581001

    http://www.aaronequipment.com/usedequipment/mixers/plow-mixer/littleford-fkm1200d-48581001 Used- Littleford Plow Mixer, 304 Stainless Steel. Approximately 26.1 Cubic Feet working Capacity, approximately 43.4 total cubic feet. Non-jacketed chamber 36" diameter x 67" long. Approximate 5-1/2" diameter shaft with (6) bolt-on plow blades and (2) end scrapers. Driven by 30 hp, 3/60/230/460 volt, 1750 R...

  • Used- Marley Series 4800 Aquatower Single Cell Cooling Tower - stock # 48587001

    http://www.aaronequipment.com/usedequipment/cooling-towers/cooling-towers/marley-4861-48587001 Used- Marley Series 4800 Aquatower Single Cell Cooling Tower, Model 4861. Approximately 110 nominal tons. Galvanized steel housing. Designed to cool 330 gallons per minute from 95 degrees F. hot water, 85 degrees F. cold water, 78 degrees F. wet bulb. Approximately 54" diameter fan, driven by a 5 hp, 3/...

  • Used- Sweco Screener, Model LS30C66, Carbon Steel. - stock # 47729007

    Used- Sweco Screener, Model LS30C66, Carbon Steel. 30" Diameter, single deck, 2 separations, clamp-on top cover, Driven by a 1/2hp, 3/60/220/440 volt, 1140 rpm motor. Includes 12M self cleaning screen. Mounted on a carbon steel base. Serial# LS30-670-57.

  • Used- Nestal Horizontal Injection Mold Machine, Model HP1000/445 - stock # 48525001

    http://www.aaronequipment.com/usedequipment/plastics-equipment/injection-molders-horizontal/nestal-hp-1000-44-48525001 Used- Nestal Horizontal Injection Mold Machine, Model HP1000/445. Approximate shot size 6.8 ounces. 40mm Injection unit. Platen Size: 23" (590mm) x 24" (610mm), Between Bars: 15.1" x 14.7", Clamp Stroke: 14.2", Max Daylight: 34.25", Min Mold Height: 8.26", Max Mold Height: 20.1",...

  • Used- Westfalia MSA-120-01-076 Desludger Disc Centrifuge - stock # 48485001

    http://www.aaronequipment.com/usedequipment/centrifuges/disc-automatic/westfalia-msa-120-01-076-48485001 Used- Westfalia MSA-120-01-076 Desludger Disc Centrifuge, 304/329 Stainless Steel Construction. Maximum bowl speed 4500 rpm, separator design (liquid/liquid/solids separation), light & heavy phase centripetal pump liquid discharge (slight wear on light phase centripetal pump, is usable), 35 hp...

  • Used- Vecoplan Shredder - Baler System - stock # 48626001

    http://www.aaronequipment.com/usedequipment/plastics-equipment/size-reduction-dual-rotor-or-single-rotor-shredders/vecoplan-rg-42-30-swu-48626001 Used- Vecoplan Retech Shredder & Baler System Consisting Of: (1) Vecoplan Retech Single Rotor Shredder, Model RG 42/30 SWU, Carbon Steel. Approximate 42" wide x 9" diameter rotor, 119 rpm. Driven by a 30hp, 3/60/460 volt, 1775 rpm motor thru a Flender r...

  • Used- Sharples DS-406 Super-D-Canter Centrifuge - stock # 48387001

    http://www.aaronequipment.com/usedequipment/centrifuges/decanter/sharples-ds-406x-48387001 Used- Sharples DS-406 Super-D-Canter Centrifuge. 317 Stainless steel construction, maximum bowl 3650 speed, 8" single lead conveyor with sintered tungsten carbide wear protection tiles, 360 degree solids discharge ports with carbide wear inserts, ring palte dam, silicone rings, base, casing, standard feed p...

  • Used- Pfaudler Glass Lined (White Glass) Reactor Body Only - stock #48549003

    http://www.aaronequipment.com/usedequipment/reactors/stainless-steel-reactors/pfaudler-5025-48549003 Used- Pfaudler Glass Lined (White Glass) Reactor Body Only, No Top Cover, 30 Gallon, Model 30-150-120-JOW, Vertical. Approximately 20" diameter x 20" straight side, dish bottom. Internal rated 150 psi/FV at 450 degrees F., carbon steel jacket rated 120 psi at 450 degrees F. 2" Center bottom outlet...

  • Used- Alfa Laval PX-80-VGV-14CH Refining Desludger Disc Centrifuge - stock # 48427001

    http://www.aaronequipment.com/usedequipment/centrifuges/disc-automatic/alfa-laval-px-80-48427001 Used- Alfa Laval PX-80-VGV-14CH Refining Desludger Disc Centrifuge. 317/2205 Stainless steel construction. Maximum bowl speed 5120 rpm. Separator design (liquid/liquid/solid separation). Light and heavy phase centripetal pump liquid discharge. Semi-hermetic design, bowl volume 10.6 gallons, bowl sludg...

  • Used- NRM Extrusion/Davis Standard Sheet Line - stock # 48502001

    http://www.aaronequipment.com/usedequipment/plastics-equipment/sheet-extrusion-lines/davis-standard-35-pm-iv-48502001 Used- NRM Extrusion/Davis Standard Sheet Line Consisting of: (1) NRM Extrusion David Standard 3-1/2" Single Screw Extruder, Model 3.5 PM IV. 24:1 L/D ratio. 5 Zone, electorally heated, air cooled non vented barrel. (Confirm water cooled) Feed throat, no hopper. Approximate 86" lon...

Aaron Equipment Company

Category: Content
Type: Blog Article

Generated 5 months ago

New blog articles detected

  • Aaron Equipment Company Exhibited at the 2016 Specialty & Agro Tradeshow

    Aaron Equipment Company exhibited at the 2016 Specialty & Agro Chemicals America Trade show in Charlestown, South Carolina on September 7-9th. The Specialty & Agro Chemicals America focused on the chemical products and technologies that have specific applications for the agrochemical and specialty chemical manufacturing markets. “Specialty and Agro” covers a diverse range of chemical end-users. Th...

Aaron Equipment Company

Category: Content
Type: Youtube Video

Generated 6 months ago

New videos detected

  • Used- Sharples PM-38000 Super-D-Canter Centrifuge - Stock# 44733001

    http://www.aaronequipment.com/usedequipment/centrifuges/decanter/44733001 Used- Sharples PM-38000 Super-D-Canter Centrifuge, stainless steel rotating assembly, max bowl speed 4000 rpm, single row lined cake discharge ports, casing (carbon steel), gearbox 2.5 km, safety guards, feed pipe, 40 hp main drive 460/3/60, backdrive, mounted on stand, control. (unit needs new bearings installed, does not ...

Out-Market Your Competitors?

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account Log in

Out-Market Your Competitors

Get complete competitive insights on over 2.2 million companies to drive your marketing strategy.

Create Free Account

Already a user?  Log in